How to upgrade bluetooth firmware via IOS NRF Toolbox

1.Send the Bluetooth firmware to your IOS device

You can send via email or other communications tool.

dfu_pkg_p200928001.1.04.002.zip

dfu_pkg_c200928001.1.04.002.zip

C is cradle Bluetooth firmware. P is scanner Bluetooth firmware.

2.Keep the connection between scanner and cradle

3.Connect the cradle to the PC side.Open Easyset

4.Use easyset to sent the command “WLSOTA” to enable upgrade the Bluetooth version.

Need to get ACK response.

5.Open your Scanner Bluetooth firmware on your device via nRF Toolbox tool.

nRF Toolbox can be download from IOS App store.

6.Use easyset to sent the command “WLSOTA” to enable upgrade the Bluetooth version.

Need to get ACK response.

7.Open your Cradle Bluetooth firmware on your device via nRF Toolbox tool as the same way with the scanner Bluetooth firmware update.

Note:For the scanner without cardle(no HR15-BT-C/HR32-BT-C/HR52-BT-C) no need to do this operation.

8.After the Bluetooth firmware upgrade , you need to power off the scanner and then power on to check the firmware version via Easyset.